Page 21 of 33
Swingarm Pivot Nut Rubber FRA93180 Fits 850/1000 ALL Models, Nevada 750 ALL, Quota 1100, Breva 750, V7 Classic, Cali 1100 (1994-1997), Cali EV, Cali Stone, Cali Jackal, Cali Vintage, Nevada 350, V65 ALL, V35 II, V35 3, V50 3, V35C, V50C, Imola, NTX 350, NTX 650, 750 Targa, Strada 750, V65 GT, V35 GT Dimensions: 9.8mm OD to push into nut Rubber plug for swing arm pivot locknut More than 5 in stock 93180105 GU93180105 93 18 01 05 9318 0105 9318.0105 93.18.01.05 £1.20 INC VAT £1.00 EX VAT
Carburettor Fuel Filter FUA60888 Fits V7 700, V7 Special, 850 GT, 1100 Sport Carb, Cali 3, Cali 1100 Carb, 850/1000 ALL Models, Nevada 350, Nevada (1991-2003), V35 ALL, V50 ALL, V65 ALL, V7 Sport, 750S, S3 Dimensions: 7.5mm internal diameter Fuel filter for Dellorto carb petrol pipe union. Also known as Guzzi ref. 002127628 and Ducati ref. 002127628 More than 5 in stock 43934000 GU43934000 43 93 40 00 4393 4000 4393.4000 43.93.40.00 Also fits Benelli Sei 750, Benelli Sei 900, Ducati 350-500 Twin,
Ducati 350-500 Twin GTV,
Ducati 350-500 Twin Sport,
Ducati 500 SL Pantah,
Ducati 600 SL Pantah,
Ducati 750 GT/Sport Koewe,
Ducati 750/900 SS Koewe,
Ducati 750 F1/Laguna Seca,
Ducati 860/900 GTS,
Ducati 900 Darmah,
Ducati 900 MHR, S2,
Ducati 900 MHR-I,
Ducati 1000 MHR-2,S2 £1.90 INC VAT £1.58 EX VAT
Gearbox Input Shaft Seal GEA90432 Fits Nevada 350, 750 SP, 750 Targa, Strada 750, Nevada 750 (1991-2001), V65, V65 Florida, V65 GT, V65C, V75 PA, V50 PA, Breva 750, Nevada 750 (2002-2013), V7 Cafe, V7 Classic, V7 Racer, V7 II ALL, V7 III ALL, V9 ALL Dimensions: 45mm OD Input shaft oil seal for gearbox More than 5 in stock 90403245 GU90403245 90 40 32 45 9040 3245 9040.3245 90.40.32.45 £9.00 INC VAT £7.50 EX VAT
Air Filter SIA10424 Fits Breva 750, V7 Classic (2008-2012), Nevada 750 (2004-2012), V7 Racer (2010-2012), V7 Cafe, Dimensions: 115mm x 155mm x 28mm Air filter, flat paper cartridge type See SIA10425 for a reusable performance air filter More than 5 in stock AP8104242 £12.00 INC VAT £10.00 EX VAT
Rear Wheel Spindle Nut and Washer Kit SSA92316 Fits 850/1000 ALL Models, Cali 1100 (1994-1997), Daytona, Centauro, Quota 1100, V35 ALL, V50 ALL, V65 ALL, Nevada 350, Nevada 750, V7 Sport, MGS-01 Dimensions: M16 M16 stainless steel full nut and thick washer for rear wheel spindle Also referred to as Guzzi ref. 14634400 and 92602316 More than 5 in stock 92602316-z 92602316 GU92602316 92 60 23 16 9260 2316 9260.2316 92.60.23.16 £10.50 INC VAT £8.75 EX VAT
Front Wheel Spindle Nut and Washer Kit SSA92516 Fits 850/1000 ALL Models, Cali 1100 (1994-1997), 1100 Sport carb, V35 ALL, V50 ALL, V65 ALL, Nevada 350, Nevada 750 Dimensions: M16 M16 stainless steel half nut and washers for front wheel spindle. Includes flat and wavy washer NB this is a half nut. Can also be used as alternator retaining nut 92603516 More than 5 in stock 92602516-z 92602516 GU92602516 92 60 25 16 9260 2516 9260.2516 92.60.25.16 £8.50 INC VAT £7.08 EX VAT
Bearing Steering Head SUA92249 Fits V7 700, V7 Special (1969-1971), V7 Sport, S3, 750S, 850T, 850 GT, 850/1000 ALL Models, 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV (1997-2006), Cali Stone, Cali Jackal, Cali Vintage, Nevada 350, Nevada 750, Quota ALL, V11 Sport, Centauro, Lario, V65 Florida, NTX 350, V35C (series 2), V50C (series 2), V65 GT, V65 TT, V65 Lario, V65 Florida, V75, 750T, Strada 750, 750 Targa, V7 Classic, V7 Cafe, V7 Racer, Breva 750, Bellagio, V7 II ALL
Taper needle roller bearing used as steering head bearing 2 sets required per bike. Also used as rear drive box pinion bearing on big twins with rear drum brake More than 5 in stock 92249225 GU92249225 92 24 92 25 9224 9225 9224.9225 92.24.92.25 £20.50 INC VAT £17.08 EX VAT
Oil Seal Bevel Box Input TRA90251 Fits V7 Classic, Breva 750, V7 Cafe, V7 Racer, Nevada 750 (2002-), V7 II ALL, V7 III ALL Dimensions: 47mm OD Drive box input seal Pinion oil seal More than 5 in stock 90403251-z 90403251 GU90403251 90 40 32 51 9040 3251 9040.3251 90.40.32.51 £16.60 INC VAT £13.83 EX VAT
Automatic Bleed Valve M6 Bleed Nipple BRA41651 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT,Stelvio ALL, Breva 1100, Breva 850, Breva 1200, 1200 Sport ALL, Norge ALL, Bellagio, Griso ALL Dimensions: M6 x 16mm The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed. - Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover More than 5 in stock
£26.50 INC VAT £22.08 EX VAT
Socket Cap Screw M5 x 50mm Stainless Steel SSA05050 Fits V65 GT, Strada 750, 750 Targa, Nevada 750 (1991-2001), NTX 350, NTX 650, V35 3, Cali 2, Spada 3, Cali 3, V65 Florida, 1000S, Mille GT Dimensions: M5 x 50mm A2 stainless socket cap screw M5 x 50, used for retaining Saprisa alternator stator More than 5 in stock 98620250-z 98620250 GU98620250 98 62 02 50 9862 0250 9862.0250 98.62.02.50 £1.20 INC VAT £1.00 EX VAT
Page 21 of 33
|